Laser Welding Machine

Product Features
The W50 laser dot welder is used for precision welding such attaching miniature accessories, attaching integrated circuit board leads, attaching watch hairsprings, and so on. In general, this product can repair breaks and fuse to pieces together. The thermally affected area is small and the welding spot size can be adjusted at will. The laser dot welder is suitable for gold, silver, platinum, stainless steel, aluminum, and metal alloys. The advantages of this product are many: speed, high efficiency, environmentally safe, and a clean finished weld.

Applications & Materials
The laser dot welder is suitable for gold, silver, platinum, stainless steel, aluminum, and metal alloys. The advantages of this product are many: speed, high efficiency, environmentally safe, and a clean finished weld.

Technical Data

Max. Laser Average Power : 50W

Wave Length : 1064nm

Max Pulse Energy : 30J

Voltage Range : 170V-400V

Max Pulse Current : 540A

Min.melt Pool : 0.1mm

Pulse Width : 0.3ms-20ms

Welding Depth : 0.05mm-2mm

Repetition Rate : 0.5-15Hz

Spot Size : 0.1mm-2mm

Input Power : 3KW

Microscope : MOTIC microscope

Electrical Source : 220V / 50Hz/20A

Dimensions : 1020mm560mm1220mm

Product Features
laser dot welder is used for precision welding such attaching miniature accessories, attaching integrated circuit board leads, attaching watch hairsprings, and so on. In general, this product can repair breaks and fuse to pieces together. The thermally affected area is small and the welding spot size can be adjusted at will.

Applications & Materials
The laser dot welder is suitable for gold, silver, platinum, stainless steel, aluminum, and metal alloys. The advantages of this product are many: speed, high efficiency, environmentally safe, and a clean finished weld.

Technical Data

Max. Laser Average Power : 60W

Wave Length : 1064nm

Max Pulse Energy : 60J

Voltage Range : 170V-400V

Max Pulse Current : 540A

Min.melt Pool : 0.1mm

Pulse Width : 0.3ms-20ms

Welding Depth : 0.05mm-2mm

Repetition Rate : 0.5-15Hz

Spot Size : 0.1mm-2mm

Input Power : 3KW

Microscope : LEICA microscope

Electrical Source : 220V / 50Hz/20A

Dimensions : 1080mm600mm1050mm

Product Features
60w Maximum Laser Output Power.comes with Imported Ceramic Cavity, Microscope and Liquid Crystal Light Shutter, X/y/z Axis Three-dimension Worktable Controlled By Industrial Movement Joystick, Fan-cooling System, Close Working Cavity.

Applications & Materials
it is Suitable for Small Precise Die Repair Welding.

Technical Data

Max. Laser Average Power : 60w

Max Pulse Energy : >30j

Pulse Width : 0.3ms-20ms

Welding Depth : 2mm

Repetition Rate : 0.5-15hz

Spot Size : 0.2mm-2mm

Input Power : 3kw

Monitor System : Microscope & Lcd

Electrical Source : 220v / 50hz / 20a

Dimensions : 1100mm600mm1100mm

Yag Laser Welder Series

Product Features
100w Maximum Laser Output Power.comes with Imported Ceramic Cavity,Microscope and Liquid Crystal Light Shutter, X/y Axis Three-dimension Worktable Controlled By Industrial Movement Joystick, External 3p Water-cooling System, Open Working Cavity. It is Suitable for Middle and Small Precise Die Repair Welding.

Applications & Materials
it is Suitable for Middle and Small Precise Die Repair Welding.

Technical Data

Max. Laser Average Power : 100w

Max Pulse Energy : 90j

Min. Spot Diameter : 0.2mm

Pulse Width : 0.3ms-20ms

Welding Depth : 2mm

Repetition Rate : 1-100hz

Input Power : 5kw

Monitor System : Microscope & Lcd

Electrical Source : 220v5% / 50hz / 30a

Dimensions : 1300mm700mm1200mm

Cooling System : 2p Water Cooling

Yag LaserWelder Series

Product Features
100w Maximum Laser Output Power.comes with Imported Ceramic Cavity,Microscope and Liquid Crystal Light Shutter, X/y Axis Three-dimension Worktable Controlled By Industrial Movement Joystick, External 3p Water-cooling System, Open Working Cavity. It is Suitable for Middle and Large Precise Die Repair Welding.

Applications & Materials
it is Suitable for Middle and Large Precise Die Repair Welding.

Technical Data

Max. Laser Average Power : 150w

Max Pulse Energy : 55j

Min. Spot Diameter : 0.15mm

Pulse Width : 0.1ms-50ms

Welding Depth : 2mm

Repetition Rate : 1-200hz

Input Power : 5kw

Monitor System : Microscope & Lcd

Electrical Source : 220v5% / 50hz / 30a

Yag Laser Welder Series

Yag Welder Series

Product Features
100w Maximum Laser Output Power.comes with Imported Ceramic Cavity,Microscope and Liquid Crystal Light Shutter, X/y Axis Three-dimension Worktable Controlled By Industrial Movement Joystick, External 3p Water-cooling System, Open Working Cavity. It is Suitable for Middle and Large Precise Die Repair Welding.

Applications & Materials
it is Suitable for Middle and Large Precise Die Repair Welding.

Technical Data

Max. Laser Average Power : 150w

Max Pulse Energy : 55j

Min. Spot Diameter : 0.15mm

Pulse Width : 0.1ms-50ms

Welding Depth : 2mm

Repetition Rate : 1-200hz

Input Power : 5kw

Monitor System : Microscope & Lcd

Electrical Source : 220v5% / 50hz / 30a

Yag Laser Welder Series

Product Features
a High Ratio of Welding Depth to Spot Diameter Results in Slender Welding Seam, Small Affected Area, Little Thermal Distortion, and Fast Welding. the Welding Seam is Smooth, Therefore There is Little or No Need to Polish the Seam After Welding is Completed. the Welding Seam is High Quality with No Gas Bubbles Left Behind. the Process Can Even Improve the Impurity of the Mother Material. the Welding Spot is Very Small and Can Be Positioned Accurately. this Process is Easily Automated.
two of the Same Material and Different Materials Can Be Welded.

Applications & Materials
the Laser Welder Can Weld the Same Material like Titanium, Nickel, Tin, Copper, Aluminum, Chromium, Niobium, Gold, Silver, Steel and Their Alloys. and It Can Weld Two Different Materials, like Copper-nickel, Nickel-titanium, Titanium-molybdenum, Brass-copper, Low Carbon Steel-copper. It also Can Be Applied Widely to Mobile Phone Batteries, Sensors, Clocks, Watches, Jewelry, Electronic Components, Eye Glasses, Crafts, Precision Instruments and Medical Apparatus Etc.

Technical Data

Max. Laser Average Power : 200w

Wave Length : 1064nm

Max Pulse Energy : 20j

Min. Spot Diameter : 0.2mm

Pulse Width : 0.3ms-20ms

Welding Depth : 1.5mm

Repetition Rate : 1-100hz

Input Power : 10kw

Control System : Chip Microprocessor(2 Axis)

Monitor System : Red Light Indication

Welding Scope : 200mm100mm100mm

Electrical Source : 380v / 50hz/30a

Dimensions : 1130mm620mm1075mm

Cooling System : 810m570mm805mm

Yag Laser Welder Series

Product Features
a High Ratio of Welding Depth to Spot Diameter Results in Slender Welding Seam, Small Affected Area, Little Thermal Distortion, and Fast Welding. the Welding Seam is Smooth, Therefore There is Little or No Need to Polish the Seam After Welding is Completed. the Welding Seam is High Quality with No Gas Bubbles Left Behind. the Process Can Even Improve the Impurity of the Mother Material. the Welding Spot is Very Small and Can Be Positioned Accurately. this Process is Easily Automated.
two of the Same Material and Different Materials Can Be Welded.

Applications & Materials
the Laser Welder Can Weld the Same Material like Titanium, Nickel, Tin, Copper, Aluminum, Chromium, Niobium, Gold, Silver, Steel and Their Alloys. and It Can Weld Two Different Materials, like Copper-nickel, Nickel-titanium, Titanium-molybdenum, Brass-copper, Low Carbon Steel-copper.
it also Can Be Applied Widely to Mobile Phone Batteries, Sensors, Clocks, Watches, Jewelry, Electronic Components, Eye Glasses, Crafts, Precision Instruments and Medical Apparatus Etc.

Technical Data

Max. Laser Average Power : 250w

Wave Length : 1064nm

Max Pulse Energy : 30j

Min. Spot Diameter : 0.2mm

Pulse Width : 0.3ms-20ms

Welding Depth : 1.5mm

Repetition Rate : 1-200hz

Input Power : 10kw

Control System : Plc(2 Axis)

Monitor System : Ccdcamera and Monitor

Welding Scope : 200m100mm100mm

Electrical Source : 380v / 50hz/30a

Dimensions : 1130mm620mm1075mm

Cooling System : 810m570mm805mm

Yag Laser Welder Series

Product Features
a High Ratio of Welding Depth to Spot Diameter Results in Slender Welding Seam, Small Affected Area, Little Thermal Distortion, and Fast Welding. the Welding Seam is Smooth, Therefore There is Little or No Need to Polish the Seam After Welding is Completed. the Welding Seam is High Quality with No Gas Bubbles Left Behind. the Process Can Even Improve the Impurity of the Mother Material. the Welding Spot is Very Small and Can Be Positioned Accurately. this Process is Easily Automated.
two of the Same Material and Different Materials Can Be Welded.

Applications & Materials
the Laser Welder Can Weld the Same Material like Titanium, Nickel, Tin, Copper, Aluminum, Chromium, Niobium, Gold, Silver, Steel and Their Alloys. and It Can Weld Two Different Materials, like Copper-nickel, Nickel-titanium, Titanium-molybdenum, Brass-copper, Low Carbon Steel-copper. It also Can Be Applied Widely to Mobile Phone Batteries, Sensors, Clocks, Watches, Jewelry, Electronic Components, Eye Glasses, Crafts, Precision Instruments and Medical Apparatus Etc.

Technical Data

Max. Laser Average Power : 250w

Wave Length : 1064nm

Max Pulse Energy : 30j

Min. Spot Diameter : 0.2mm

Pulse Width : 0.3ms-20ms

Welding Depth : 1.5mm

Repetition Rate : 1-200hz

Input Power : 10kw

Control System : Plc(2 Axis)

Monitor System : Ccdcamera and Monitor

Welding Scope : 200m100mm100mm

Electrical Source : 380v / 50hz/30a

Dimensions : 1300mm700mm1200mm

Cooling System : 810m570mm805mm

Yag Laser Welder Series
Product Features
a High Ratio of Welding Depth to Spot Diameter Results in Slender Welding Seam, Small Affected Area, Little Thermal Distortion, and Fast Welding. the Welding Seam is Smooth, Therefore There is Little or No Need to Polish the Seam After Welding is Completed. the Welding Seam is High Quality with No Gas Bubbles Left Behind. the Process Can Even Improve the Impurity of the Mother Material. the Welding Spot is Very Small and Can Be Positioned Accurately. this Process is Easily Automated.
two of the Same Material and Different Materials Can Be Welded.

Applications & Materials
the Laser Welder Can Weld the Same Material like Titanium, Nickel, Tin, Copper, Aluminum, Chromium, Niobium, Gold, Silver, Steel and Their Alloys. and It Can Weld Two Different Materials, like Copper-nickel, Nickel-titanium, Titanium-molybdenum, Brass-copper, Low Carbon Steel-copper.
it also Can Be Applied Widely to Mobile Phone Batteries, Sensors, Clocks, Watches, Jewelry, Electronic Components, Eye Glasses, Crafts, Precision Instruments and Medical Apparatus Etc.

Technical Data

Max. Laser Average Power : 300w

Wave Length : 1064nm

Max Pulse Energy : 40j

Min. Spot Diameter : 0.2mm

Pulse Width : 0.3ms-20ms

Welding Depth : 2mm

Repetition Rate : 1-200hz

Input Power : 12kw

Control System : Plc(2 Axis)

Monitor System : Ccdcamera and Monitor

Welding Scope : 300m300mm300mm (life Manual)

Electrical Source : 380v / 50hz/40a

Dimensions : 1670mm1480mm1285mm

Cooling System : 910m560mm1200mm

Yag Laser Welder Series
Product Features
a High Ratio of Welding Depth to Spot Diameter Results in Slender Welding Seam, Small Affected Area, Little Thermal Distortion, and Fast Welding. the Welding Seam is Smooth, Therefore There is Little or No Need to Polish the Seam After Welding is Completed. the Welding Seam is High Quality with No Gas Bubbles Left Behind. the Process Can Even Improve the Impurity of the Mother Material. the Welding Spot is Very Small and Can Be Positioned Accurately. this Process is Easily Automated.
two of the Same Material and Different Materials Can Be Welded.

Applications & Materials
the Laser Welder Can Weld the Same Material like Titanium, Nickel, Tin, Copper, Aluminum, Chromium, Niobium, Gold, Silver, Steel and Their Alloys. and It Can Weld Two Different Materials, like Copper-nickel, Nickel-titanium, Titanium-molybdenum, Brass-copper, Low Carbon Steel-copper.It also Can Be Applied Widely to Mobile Phone Batteries, Sensors, Clocks, Watches, Jewelry, Electronic Components, Eye Glasses, Crafts, Precision Instruments and Medical Apparatus Etc.

Technical Data

Max. Laser Average Power : 300w

Wave Length : 1064nm

Max Pulse Energy : 40j

Min. Spot Diameter : 0.2mm

Pulse Width : 0.3ms-20ms

Welding Depth : 2mm

Repetition Rate : 1-200hz

Input Power : 12kw

Control System : Pc(2 Axis)

Monitor System : Ccdcamera and Monitor

Welding Scope : 300m300mm300mm (lift Manual)

Electrical Source : 380v / 50hz/40a

Dimensions : 1670mm1480mm1285mm

Cooling System : 910m560mm1200mm